Specification Page iPF720

Article ID: ART104882 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Specification Page iPF720


Class 36-inch
Ink Type Dye and pigment reactive ink: BK, MBK x 2, C, M, Y
Maximum Print Resolution 2400 x 1200 dpi
Dimensions, Weight (Net)
W x D x H (mm), (kg)
Main unit  -
Main unit with Printer Stand 1507 W x 871 D x 1094 H mm
approx. 64 kg
 (excluding consumables)
Dimensions, Weight (Packaged)
W x D x H (mm), (kg)
Main unit with palette       1695 W x 760 D x 722 H mm ; approx. 79 kg
W x 760 D x 912H mm ; approx. 94 kg  (Printer Stand included)
Printer Stand  1370 W x 691D x 194 H mm ; Weight: approx. 15 kg
Power Supply Input power AC 100-240V50/60Hz
Power consumption Operation: 140 W or less 
Standby power consumption 100 V - 120V 5.0 W or less (10 W or less when IEEE1394 is mounted
(At the low power mode) 220 V - 240 V 6.0 W or less (11 W or less when IEEE1394 is mounted)
Power off (standby) 1 W or less
(In compliance with Executive Order of the President of the United States of America.)                                                                                                                                                                                           
Operational Environment Temperature: 15 - 30°C, Humidity: 10 - 80 %  (Condensation free)
Acoustic Noise Acoustic pressure Operation: 52 dB (A) or less, Standby: 35 dB (A) or less 
Acoustic power Operation: 6.6 Bels or less
Minimal Line Width 0.02 mm  (Theoretical value)
Line Accuracy +/-0.1 % or less
User adjustments necessary. Printing environment and media must match those used for the adjustments.
CAD paper required: plain paper, coated paper, CAD tracing paper and CAD translucent matte film only.
Detector and Adjustment Registration adjustment Automatic / Manual
Banding adjustment (Line Feed adjustment) Automatic / Manual
Line length adjustment Manual
Head slant adjustment Automatic / Manual
Color calibration No
Head gap adjustment Automatic / Manual
Non-firing detection Yes
Non-firing compensation  Yes
Roll media remaining detection function Yes
Memory Standard memory 256 MB
Expansion slot None
Harddisk 80GB
Firmware Languages Printer language GARO (Graphic Arts language with Raster Operations)HP-GL/2HP RTL
Job control CPCA
Status reply CPCASNMP-MIBStandard MIBCanon-MIB
Type Flash ROM
Update Updated from USB, 1394, Ethernet port  (Utility use)
Operation Panel Display Large LCD: 160 x 128 dots; Key x 12, LED x 5
Language on operation panel US-English, Japanese
Languages  US-English, French, German, Italian, Spanish, Chinese, Korean, Russian, Japanese (Kanji)
Interface USB2.0 Hi-Speed Type Built-in
Mode Full Speed (12 Mbit/sec), High Speed (480 Mbit/sec), Bulk transfer
Connector type Series B (4 pins)
Ethernet Type Built-in
Standard IEEE 802.3 10base-T
IEEE 802.3u 100base-TX / Auto-Negotiation
IEEE 802.3 x Full Duplex
Protocol IPX/SPX (Netware 4.2(J), 5.0(J), 6.0(J))
SNMP (Canon-MIB), HTTP, TCP/IP, AppleTalk
IEEE1394 (Option) Type Slot card type (Option)
Standard IEEE1394 - 1995, P1394a (Based on Draft 2.0), Half duplex,
Data/Strb differential serial
Data-transfer time 100/200/400 Mbit/sec.
Connector type In compliance with IEEE1394 - 1995, 6 pins, No power supply
Expansion Slot 1
Print Head
Print Head Model  PF-03
Type Bubble-jet on demand
Head configuration 6 colors integrated type (6 chips per print head x 1 print head) 
Nozzle pitch 1, 200 dpi x 2
Nozzle per chip MBK: 5, 120 nozzles, each other color: 2, 560 nozzles 
Droplet size 4 pl (per color)
Ink Tank
Ink Tank Model PFI-102 (MBK, BK, C, M, Y)
Supply Tubing system
Colors MBK x 2, BK, C, M, Y
Capacity Bundled starter ink : 90 ml,  sales ink : 130 ml 
Level detection Detected by dot count and electrode (Empty)
Smart chip Each ink tank is equipped with EEPROM which stores its ink level. 
model CT-5
Type Automatic horizontal cutting (Rotary cutter)



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments