After following the procedure on the preceding page to register a Custom Function group, follow the procedure below to apply the Custom Function group's settings to the camera.
|
On the menu, select "Personal Functions (P.Fn)."
- Press the <MENU> button.
- While pressing the <MENU> button, turn the <
 > dial to select < >.
- While pressing the <SELECT> button, turn the <> dial to select "Personal Functions (P.Fn)." Then let go of the <SELECT> button.
Select "P.Fn 00."
- While pressing the <SELECT> button, turn the <> dial to select "P.Fn 00."
Select "Apply."
- While pressing the <SELECT> button, turn the <> dial to select "Apply." Then let go of the <SELECT> button.
- If the P.Fn 00 group has not been registered, "Apply" cannot be selected. First follow the procedure in "Set Custom Function Groups."
Select the group number to be applied.
- While pressing the <SELECT> button, turn the <> dial to select "P.Fn-00-1," "P.Fn-00-2," or "P.Fn-00-3." Then let go of the <SELECT> button.
- When you select a registered group number, the respective Custom Function settings ("Registered contents") will be displayed. If you select an unregistered group number, the "Not registered" message will appear.
Select "OK."
- While pressing the <SELECT> button, turn the <> dial to select "OK." Then let go of the <SELECT> button.
Check the registered group's Custom Function settings.
- The group number of the Custom Functions that were applied is displayed in green, and the settings are also displayed.
- Check the applied Custom Function settings.
- Press the <MENU> button to return to the menu. To exit the menu and turn off the LCD monitor, press the <MENU> button again.
|
