You can erase-protect images to prevent accidental erasure. You can press the <
> button to switch between single-image and index display in order to protect individual pictures.
 |
From the menu, select [Protect].
- Press the <MENU> button.
- Turn the <
 > dial to select [Protect].
Open the Protect Settings screen.
The display goes to the Protect Settings screen.
- Press the <> button to show the Protect Settings screen on an index display, then press the < > button again to show the Protect Settings screen on a single image display.
Protect the image.
- Turn the <> dial to select the image you want to protect, then press the <SET > button.
Protected images are identified with a < > icon.
- Press the <SET> button again to cancel protection and delete the <> icon.
- If you have other images to be protected, repeat the above steps.
- Press the <MENU> button to exit Protect mode.
|
Once an image is protected, it cannot be removed by the camera's Erase function. To erase a protected image, you must first remove the protection.
If you protect the images you need and erase all the images at once, all non-protected images will be erased. This is handy when you want to erase all the images you do not need at once.
