Error messages related to videocassette tapes for the XH A1S and XH G1S
Article ID: ART105262 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Error messages related to videocassette tapes for the XH A1S and XH G1S

Solution

This section describes what to do when cassette tape-related error messages appear in the camcorder's LCD screen.

Problem

Cause / Solution

CONDENSATION HAS BEEN DETECTED

Condensation has been detected in the camcorder.
< Solution >
Please refer to the related information below

HEADS DIRTY, USE CLEANING CASSETTE

Video heads are dirty.
< Solution >
Clean the video heads.

PLAYBACK STD LOCKED
PLAYBACK IS RESTRICTED

When the playback standard is already set in the camcorder, you attempted to play back a tape in a video standard different from that set.

REMOVE THE CASSETTE

Camcorder stopped operating to protect the tape.
< Solution >
Remove the cassette and reinsert it.

TAPE END

Tape reached the end.
< Solution >
Rewind the tape or replace the cassette.

THE TAPE IS SET FOR ERASURE
PREVENTION

Cassette is protected.
< Solution >
Replace the cassette or change the position of the protect switch.
If these problems persist even after attempting the solutions described above, please contact the nearest Canon service center.

SIMS Doc Id

0