Click [Setup] in the [Add Schedule Item] and [Edit Schedule Item] dialog, and then Camera Server's top page appears after Internet Explorer launches (VB-C500VD/VB-C500D).

Click [Setting Page] to display the Setting Page to change Camera Server settings.

Items related to recording schedule setting are as follows. See the Camera Server's manual for details.

User Name and Password

• Set the user name and password for the Camera Server. You cannot set them with VK-64/VK-16.

Motion detection recording

• If the Camera Server is VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi, or VB150, you can configure the Motion Detection settings on the Camera Server.
• To configure the Motion Detection settings on VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi, or VB150, use the VB Administration Tools supplied with the Camera Server.
• For VB150 ([Video Input] should be set to [Single]), the Motion Detection settings are configured using the VK-64/VK-16 [Motion Detection Settings] dialog
• The Motion Detection function is not suitable for conditions where high reliability is required. It is not recommend using this function in situations where high reliability is required, such as for monitoring purposes. Canon accepts no liability whatsoever for faults, etc. resulting from the use of the Motion Detection. Image/Video Quality
• You can set the image/video quality. The Motion Detection settings may be affected by the video quality setting of the Camera Server. When changing the video quality on the Camera Server, be sure to check the settings for Motion Detection.

Camera Name

• Set the name of the camera displayed in the [Camera Server] list. You cannot set them with VK-64/VK-16.

Preset

• Presets should be set on the Camera Server in advance. You cannot set them with VK-64/VK-16.
• If the recording settings using a preset are used on the Camera Server, the preset position will override camera positions set by VK-64/VK-16, including those in recording schedules and Camera Server position. The camera control will be lost when starting to control the camera at the Camera Server.
• If predefined presets are not shown in the [Preset] drop-down menu even though they have been defined on the Camera Server, click [Get Camera Control] to display the [Camera Control] Panel, obtain camera control, then configure the settings again. Restrict Service Time
• If a Camera Server has been configured with [Service time restricted] enabled, VK-64/VK-16 will be able to record from the Camera Server during restricted times. External Device
• Specify the name of the external device, such as sensor name. You cannot configure it with VK-64/VK-16.
• If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it. Sensor input, Recording to Camera Memory
• Camera Servers have certain features to capture image into its memory based on sensor input or schedule. If settings are enabled on the Camera Server, those settings take precedence.