Ask a Question

Setting date & time Sure Shot 105u

Article ID: ART105521 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

Setting the Date and Time

When you replace the battery or travel to the different time zone, use the following procedure to set or adjust the date and time settings.

Select the Date mode.

Press the button for more than 2 seconds for date/time set mode.
Press the button to select the setting position (numbers blinking). Setting position cycles through in the order year-month-day-hour-minute-(:).
Press the button to set the number.
Repeat 3 and 4 above to set all digits of the date and time.

Pressing the button while ":" is blinking resets the seconds (:) setting to zero.
Finish setting the date and time.
  • Press the button and once":" stops blinking, date and time setting is completed.
  • Press the button end the power switches off.

Each time the button is pressed, the number increases by one. If kept , ' pressed, the number increases continuously.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments