Use the following procedure to during cleaning or replacing the feed roller to remove the feed roller.
Solution
Use the following procedure to during cleaning or replacing the feed roller to remove the feed roller.
Open the feed tray.
Open the feeder cover.
Open the roller cover.
Lift up the roller lock lever, and slide it to the left.
Remove the feed roller.
Attach the feed roller. Align the notch on the roller with the pin on the scanner.
Slide the roller lock lever to the right to fit it onto the pin on the left side of the feed roller, and then lower the lever to lock the roller into place.
Close the roller cover until it clicks into place. Make sure to press until you hear the cover click. Failure to securely close the cover will cause document feed problems.