Wireless LAN setup using WPS connection - Windows (MX340)
Article ID: ART105761 | | | Date published: 05/11/2015 | | | Date last updated: 08/15/2015 |
Description
Follow these instructions if your access point or router supports WPS (Wi-Fi Protected Setup). For details on WPS, refer to the manual of your access point.
Solution
How to perform the wireless LAN setup using WPS connection(Windows) |
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.
Add (connect) the machine to the network.
Notes on Wireless Connection
Wireless Setup Using WPS (Wi-Fi Protected Setup) 1.
Use the Menu button (A) to select Device settings.
2.
Use the or button (B) to select LAN settings,
then press the OK button.
The LAN settings screen is displayed.
3.
Select WLAN active/inactive, then press the OK button.
The WLAN active/inactive screen is displayed.
4.
Select Wireless LAN active, then press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (C) lights blue.
The LAN settings screen is displayed.
5.
Select Wireless LAN setup, then press the OK button.
The Wireless LAN setup screen is displayed.
6.
Select WPS, then press the OK button.
The WPS screen is displayed.
7.
Select Push button method, then press the OK button.
The When the access point is ready, press [OK] of the device. screen is displayed.
8.
Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the manual of your access point.
The Connected screen is displayed.
The Wi-Fi lamp (blue) flashes while searching for or connecting to an access point.
9.
Press the OK button.
The LAN settings screen is displayed.
10.
Press the COPY button (D).
The copy standby screen is displayed.
Install the Software
1.
Make sure that the machine is turned on and that the Wi-Fi lamp (A) lights blue.
2.
Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
If you are using Windows, the setup program starts automatically.
Windows 7/Windows Vista -> 3
Windows XP/Windows 2000 -> 4
3.
Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Continue or Yes.
4.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed all together.
5.
Click Install.
6.
Select Use the printer on network, then click Next.
Follow any on-screen instructions to proceed with the software installation.
7.
When the Printer Detection screen appears, click Next.
8.
Make sure the machine is turned on, then click OK.
9.
When the Detected Printers List dialog box appears, select Canon MX340 series, then click Next.
10.
When the Setup Completion screen appears, click Complete or OK.
Install the Software (Information) 1.
Click Next.
Follow any on-screen instructions to proceed with the software installation.
Important Information for the Installation
The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).
If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
2.
Click Exit to complete the installation.
If Restart is displayed, follow the instruction to restart the computer.
3.
Solution Menu starts automatically.
- Using the Machine from Additional Computers
Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network.
Install software including the drivers on the computer from which you want to use the machine. Other settings are not required.
|
SIMS Doc Id
0