Setting the Date and Time

Note When the machine is connected to a computer with the MP Drivers installed, the date and time setting will be copied from the computer to the machine. As long as the date and time are set accurately on your computer, you do not need to set them on the machine. If you disconnect the power plug or when there is a power failure, the date and time setting on the machine will be reset. When you connect the machine to a computer with the MP Drivers installed, the setting may be copied to the machine once again.

1. Display the Date/time setting screen.

   (1) Press the Setup button.
   
   
2. (2) Select Device settings , and press the OK button.
   
   
   (3) Select Device user settings, and press the OK button.
   
   

   (4) Select Date/time setting, and press the OK button.

2. Enter the date and time.
   

(1) Use the Numeric buttons to enter the date and time (in 24-hour format).

Enter only the last two digits of the year.

Note You can also use the or button (Scroll Wheel) to enter the number. If you misentered the date and time, use the or button to move the cursor under the wrong number, and reenter the correct number.

(2) Press the OK button.

Note The date display format can be selected from three formats: YYYY/MM/DD, MM/DD/YYYY, or DD/MM/YYYY (Date display format).

1. Press the FAX button to return to the fax standby screen.

Page top