Article ID: ART106028 | | | Date published: 05/11/2015 | | | Date last updated: 08/15/2015 |
Description
Solution
Reseat the Ink Tanks
If the ink tanks are not installed correctly, you may hear knocking noise and error messages may appear on the printer's display.
-
Make sure that the power is turned on, and open the Paper Output Tray gently.
-
Lift the Scanning Unit (Cover) until it stops.
-
The Print Head Holder moves to the replacement position.
|
|
-
Push the tab (A) and lift it to remove all the ink tanks.
Note: It may be necessary to twist the ink tank slightly to remove it from the print head holder. -
Do not touch the Print Head Lock Lever (B).
|
-
Reinstall the ink tanks.
-
Insert the front end of ink tank into the Print Head at a slant.
Make sure that the position of the ink tank matches the label. -
Press the mark
(Push) on the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up red.
-
|
-
Close the Scanning Unit (Cover) gently.
|