Article ID: ART106145 | | | Date published: 05/11/2015 | | | Date last updated: 08/15/2015 |
Description
Solution
Installing the Battery Pack
Install Battery Pack NB-6L (supplied) as shown below.
Please charge the battery pack before you use it for the first time. |
1. Slide the memory card slot/battery cover and open it.(,). | |
2. Push the battery lock in the direction of the arrow as shown () and insert the battery until it locks. |
|
3. To remove the battery, push the battery lock in the direction of the arrow () and hold it while pulling the battery out. |
4. Close the memory card slot/battery cover (,). |
|
Please use an AC Adapter Kit ACK-DC40 (sold separately) for extended use of the camera. |
Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period.
When the LCD monitor is off, this icon will display when you press any button other than the power or (Print/Share) button. |
|
"Change the battery pack" |
Battery charge is insufficient to operate the camera. Replace the battery pack immediately. |
Installing the Memory Card
1. Insert the memory card until it clicks into place as shown.
2. Close the memory card slot/battery cover (,).
To Remove the Memory Card
Push the memory card with your finger or the toggle on the wrist strap until the memory card clicks and then release it. Then pull the card straight out.
Ensure that the memory card is correctly oriented before inserting it in the camera. Inserting it backward may cause the camera to fail to recognize the memory card or to malfunction. |