Bluetooth Setup (Mac OS X)

To print via Bluetooth communication using Macintosh, the following conditions are required:

• Apple Macintosh computer containing Bluetooth modules, or Macintosh with D-LINK DBT-120 USB Bluetooth rev.B installed
• Mac OS X 10.3.3 Operating System or later
• BJ Printer Driver v.3.4.0 for Mac OS X installed
  

In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are required.

STEP 1

Check that the Bluetooth unit is properly attached to the printer.

STEP 2

Install the printer driver.

STEP 3

Check the device name using the Setup Utility.

1. Check that the printer is connected with the computer with a USB cable, and that the printer is on.

2. Double-click the 'Applications' folder in the hard disk where the printer driver is installed, then 'Canon xxxx Setup Utility' folder, and then the 'Canon xxxx Setup Utility' icon. The Canon xxxx Setup Utility will start.

3. Select the 'Bluetooth Settings' tab, and then click 'Change' in Bluetooth Settings page.

Note: If the Bluetooth Settings feature does not appear on the Canon xxxx Setup Utility screen, the Bluetooth unit may not be installed correctly.

4. Enter a passkey. The passkey is an identification number to be determined by the user. It is used to prevent interference from other Bluetooth devices.

Enter the initial value, 0000, and click 'OK'.

5. Check the Model. The Model is necessary to register the printer as a Bluetooth device using the Bluetooth Setup Assistant. Be sure to note the Model.

Note: To register and use multiple units, changing the model name is recommended for easy identification of the printer you will use. Model names can be changed using a maximum of 24 characters. After changing the model name, click 'Send'.

After checking the model name, click 'Cancel', and 'Close' on the Canon xxxx Setup Utility.

STEP 4

Registering the Printer

Register the printer as a Bluetooth device using Bluetooth Devices under Control Panel.

1. Click the Bluetooth icon on the menu bar and then select 'Set up Bluetooth Device'.
   
   
   
   The Bluetooth Setup Assistant starts.
   
   Note: When the Bluetooth icon is not displayed on the menu bar, Select 'Bluetooth' from System Preferences, check 'Show Bluetooth status in the menu bar' on Settings.
   
   
2. Wait while the Bluetooth devices in range are detected. Once your printer appears in the list, select it and click 'Continue'.
   
   
3. Click the plus (+) sign that is beneath the printer list to add the printer.
   
   
4. After searching (a short wait), the printer will appear in the list along with any other detected printers. Select your printer and then click the 'Add' button.
   
   
5. The printer will now be included in the list of installed printers and ready to begin printing via Bluetooth.