Installing the battery on the EOS Digital Rebel T2i
Article ID: ART106220 | Date published: 05/11/2015 | Date last updated: 02/05/2016


Installing the battery


Installing and Removing the Battery

Load a fully charged Battery Pack LP-E8 into the camera.

1 Open the battery compartment cover.
  • Slide the lever as shown by the arrow and open the cover.
2 Insert the battery.
  • Insert the end with the battery contacts.
  • Insert the battery until it locks in place
3 Close the cover.
  • Press the cover until it snaps shut.

Removing the Battery

Open the cover and remove the battery.
  • Press the battery release lever as shown by the arrow and remove the battery.
  • To prevent short circuiting, be sure to attach the protective cover to the battery.