Scanning Settings When Sending a Fax
Changing the Scanning Settings per job
This section describes how to change the scanning settings when sending a fax.
Image quality settings
Specify the scanning resolution.
Higher resolutions will result in better image quality, but also longer transmission times.
| <200 x 100 dpi (Normal)> |
For text documents |
| <200 x 200 dpi (Fine)> |
For fine text documents |
| <200 x 200 dpi (Photo)> |
For documents that contain photographs |
| <200 x 400 dpi (Superfine)> |
For fine text documents |
Density settings
Specify the scanning density.
[  ] |
Makes the scanning density lighter. |
[  ] |
Makes the scanning density darker. |
Sharpness settings
You can emphasize the outline of the image in the document or decrease the contrast.
| [ ] |
If you want to clearly scan halftone images, adjust the sharpness to <->.
This can reduce the moire effect (patchy patterns called "moire"). |
| [ ] |
If you want to clearly scan text or lines, adjust the sharpness to <+>.
This is appropriate for scanning documents with fine markings,
such as blueprint or thinly penciled documents. |
Changing the Default Values for Fax
The default values for fax are those functions which are applied automatically when [
] (Reset) is pressed or the power is turned ON. You can change the default values to suit your needs.
You can register the following types of settings as the default values.
- Resolution
- Density
- Sharpness
1. Press [
] (Menu).
2. Press [ 
] or [ 
] to select <Fax TX Settings>, and then press [OK].
3. Press [ ] or [ ] to select <TX Function Settings>, and then press [OK].
4. Press [ ] or [ ] to select <Change Defaults>, and then press [OK].
5. Press [ ] or [ ] to select a setting item, and then press [OK].
Resolution/Density/Sharpness
For details on setting, see "Changing the Scanning Settings."
6. After specifying the setting, press [ ] or [ ] to select <Apply>, and then press [OK].
7. Press [ ] (Menu) to close the menu screen.
