Select Line Type (MF4450/MF4570)

Article ID: ART106560 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Select Line Type


Select Line Type

If you cannot send a fax, change this setting.

If you are not sure about your telephone line type, contact your local telephone company.

1. Press [ ] (Menu).

2. Press [ ] to [ ] to select <Fax TX Settings>, and then press [OK].

3. Press [ ] to [ ] to select <Basic Settings>, and then press [OK].

4. Press [ ] to [ ] to select <Select Line Type>, and then press [OK].

5. Press [ ] or [ ] to select the Line Type setting you wish to use, then press [OK].

(Bold: Default setting)

Dial 10 PPS Specify when you are using a pulse line.
Tone Specify when you are using a tone line.
* When <Apply> appears in the screen, you must select <Apply> and press [OK] to apply the setting.

6. Press [ ] (Menu) to close the menu screen.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments