Installation Via USB

This is the recommended installation when you use the machine on single computer, which is not networked.

IMPORTANT: Do not connect the USB cable yet.

• To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)
• Screens are based on Windows Vista Ultimate and Mac OS X v.10.5.x.

• Quit all running applications before installation.
• Log on as the administrator (or a member of the Administrators group).
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
• It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
• Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.4.10 or earlier are not supported.

Windows

Follow these steps if you connected the machine via USB cable before installing the software.

For Windows 7:

1. Remove the USB cable connected to your computer.
   
   
2. Proceed to step 1 in Software Setup.
   

For Windows Vista/Windows XP/Windows 2000:

The following dialog box may appear.

1. Remove the USB cable connected to your computer.
   
   
2. If the dialog box closes, proceed step 1 in Software Setup.
   
   
3. Click 'Cancel'.
   
   
4. Proceed step 1 in Software Setup.

Easy-WebPrint EX: If you are using Internet Explorer 7 or later, you can use the Web print software Easy-WebPrint EX. An internet connection is required for installation.

Software Setup

1. Press the <ON> button (A) to TURN OFF THE MACHINE.
   
   
   
   Operating noise may continue for up to 30 seconds until the machine turns off.
   
   
2. Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
   
   
3. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
   If you are using Windows, the setup program starts automatically.
   
   
   
   1. If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer.
      
   2. When the CD-ROM contents appear, double-click MSETUP4.EXE.
      
      
4. Windows 7/Windows Vista.
   
   For Windows XP/Windows 2000 users, go to step 6.
   
   
   
   
5. Click 'Run Msetup4.exe' on the AutoPlay screen, then click 'Continue' or 'Yes' on the User Account Control dialog box.
   
   If the User Account Control dialog box reappears in following steps, click 'Continue' or 'Yes'.
   
   
6. Click 'Easy Install'.
   The drivers, application software, and on-screen manuals are installed all together.
   
   
   
   Note: If you want to select particular items to install, click Custom Install.
   
   For Windows 7 / Windows Vista SP1 or later:
   You can install the XPS Printer Driver from Custom Install. When installing the XPS Printer Driver, select the MP Drivers at the same time.
   
   
7. Click 'Install'.
   To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later.
   
   
   
   
8. Select 'Use the printer via USB', then click 'Next'.
   
   
   
   
9. Follow any on-screen instructions to proceed with the software installation.
   
10. When the Printer Connection screen appears, connect the machine to the computer with the USB cable.
    
    
    
    The USB Port is located on the back center of the machine.
    
    The upper port is for USB.
    
    Necessary Information for the User Registration
    
    
    
    The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).
    
    If the power is on, the FINE Cartridge Holder will move when the Scanning Unit (Cover) (B) is opened.
    
    
11. If the Extended Survey Program screen appears
    
    
    
    If you can agree to Extended Survey Program, click 'Agree'.
    
    If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
    
    
12. Click 'Exit' to complete the installation.
    
    
    
    
13. If Restart is displayed, follow the instruction to restart the computer.
    
    
14. Solution Menu starts automatically.
    
    
    
    
15. Remove the Setup CD-ROM and keep it in a safe place.
    
    The buttons displayed on Solution Menu may vary depending on the country or region of purchase.

Software Setup

1. Press the ON button (A) to TURN OFF THE MACHINE.
   Operating noise may continue for up to 30 seconds until the machine turns off.
   
   Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
   
   
   
   
2. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
   
   
   
   The Setup program will appear.
   
   
   
   
3. Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click 'OK'.
   
   
4. If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
   
   
5. If you do not know your administrator name or password, click the help button , then follow the on-screen instructions.
   
   
6. Click 'Easy Install'.
   The drivers, application software, and on-screen manuals are installed all together.
   
   
   
   
7. If you want to select particular items to install, click 'Custom Install'.
   
   
8. Click 'Install'.
   
   
   
   
9. Select Use the printer via USB, then click 'Next'.
   
   
   
   
10. Follow any on-screen instructions to proceed with the software installation.
    
    
11. When the Printer Connection screen appears, connect the machine to the computer with the USB cable.
    The USB Port is located on the back center of the machine.
    The upper port is for USB.
    
    
    
    
    Necessary Information for the User Registration
    
    
    
    The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).
    
    If the power is on, the FINE Cartridge Holder will move when the Scanning Unit (Cover) (B) is opened.
    
    
12. If the Extended Survey Program screen appears
    
    If you can agree to Extended Survey Program, click 'Agree'.
    
    If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
    
    
    
    
13. Click 'Exit' to complete the installation.
    
    
    
    
14. If Restart is displayed, follow the instruction to restart the computer.
    
    
15. It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
    
    
16. Click the icon on the Dock to start Solution Menu.
    
    The buttons displayed on Solution Menu may vary depending on the country or region of purchase.
    
    
    
    
17. Remove the Setup CD-ROM and keep it in a safe place.