Procedure for erasing images PowerShot SX20 IS.

Article ID: ART106672 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Procedure for erasing images PowerShot S90.



You can erase images from a memory card using the following criteria outlined below.

Select Erases images after selecting them one at a time.
Select Range Erase images in a Range choosing the first and last images to erase those images inbetween.
All Images Erases all images on a memory card.

  • Please note that erased images cannot be recovered. Exercise caution before erasing a file.

  • Protected images also cannot be erased.

1. Turn on the camera in the Playback mode. and select [Erase].

2. Press the [FUNC./SET] button and choose the desired criteria for image deletion (Proceed to the bottom of this page if you choose to delete [All Images].


Use the or button on the omni selector to select an image you wish to erase and press the [FUNC./SET] button. A confirmation screen appears.

- Pressing the [FUNC./SET] button again cancels the setting.

[Select Range]

Press the button, choose [Last image] and press the <FUNC./SET> button.

Press the or buttons, or turn the <Control Dial> to choose an image, and press the <FUNC./SET> button.

- You cannot choose images before the first image.

Press the button to choose [Erase] then press the <FUNC./SET> button.

[All Images]

Choose [All Images] from the erase menu, and press the <FUNC./SET> button.

Press the or buttons or turn the <Control Dial> to choose [OK] and press the <FUNC./SET> button.

  • Protected images cannot be erased with the erase function.
  • The [Erase all] function erases all the image data recorded on the memory card.
  • You should format the memory card when you want to erase not only image data but also all the data contained on the card.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments