Ask a Question

Setting the MG8120 back to default settings

Article ID: ART106755 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Setting the machine back to its factory (default) settings.

Solution

Changing the Machine Settings on the LCD

  1. Make sure that the machine is turned on.

  2. Select Setup on the HOME screen.

  3. Select Device settings, then touch the OK button.

    The Device settings screen is displayed.

  4. Use the UPDOWN button to select Reset settings , then touch the OK button.


  5. Use the UPDOWN button to select Yes or No, then touch the OK button.
Note
  • You cannot change the following setting items back to the default:
    • The language displayed on the LCD
    • The current position of the Print Head
    • The Read/write attribute setting
    • LAN settings*
    * You can change LAN settings back to the default from Reset LAN settings under LAN settings.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments