Registering a Paper Size (LBP6650)

Article ID: ART106780 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Registering a Paper Size


Registering a Paper Size

This printer cannot automatically detect the paper size. Therefore, you need to register the size of the loaded paper.

Register the paper size using the following procedure. (The paper size setting is set to "LT" by default.)


Precautions when specifying [MIXED SIZES]

  • The printer performs printing without checking the paper settings in the printer driver.

Make sure that the paper specified in the printer driver matches that loaded in the paper cassette before using the printer.

  • If you are using the UFR II printer driver, load custom size paper whose long edges are 8.50 in. (215.9 mm) or less in landscape orientation.

1. Press [ ] (Feeder Selection).

2. Select [TRAY PAPER SIZE], [CASSETTE1 SIZE] or [CASSETTE2 SIZE] using [ ] and [ ], and then press [OK].

3. Select a paper size using [ ] and [ ], and then press [OK].

* "=" is displayed on the left of the paper size, and the paper size for the paper cassette is specified.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments