You can shoot continuously at a maximum speed of approximately 0.7 images/second while the <shutter button> is pressed fully and held. (When shooting continuously in [Low Light] () mode, the maximum speed is approximately 2.6 images/second)
1. Press the <Power> button.
2. Press the <FUNC./SET> () button.
3. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select the [Single Shot] ().
Press the <FUNC./SET> () button.
4. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select the [Continuous Shooting] ().
Press the <FUNC./SET> () button.
5. The following screen appears on the LCD monitor.
If the [Continuous Shooting] () icon is displayed on the upper-left part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
There are three modes of continuous shooting so that you can select an appropriate one depending on the scene.
Drive Mode |
Description |
Continuous Shooting |
Approx. 0.7 images/sec., max. |
The camera shoots continuously with the focus and exposure set when the shutter button is pressed halfway. |
Continuous Shooting AF |
Approx. 0.5 images/sec., max. |
The camera shoots continuously and focuses.The [AF Frame] is set to [Center]. |
Continuous Shooting LV* |
Approx. 0.5 images/sec., max. |
The camera shoots continuously with the focus fixed to the position set in manual focus. In ( ), the focus is locked on the first shot. |
*1 [
Continuous Shooting AF] (
) does not appear when [Fireworks] () or [Manual Focus] () is selected.
*2 [Continuous Shooting LV] () appears when [Fireworks] () or [Manual Focus] () is selected.
Note:
- Continuous shooting speed increases in [Low Light] () mode. (Approx. 2.6 images/sec.)
- To set the shooting mode to [Low Light] () , follow the instructions below.
|
1. Set the <Mode Dial> to [SCN] ().
2. Press the <FUNC./SET> () button.
3. Operate the <directional buttons> up and down to select [Rec. mode]. ( [Smart Shutter] () appears if settings have not been changed before.)
4. Press the <FUNC./SET> () button.
5. Operate the <directional buttons> up and down to select [Low Light] ().
6. Press the <FUNC./SET> () button.