Connecting the Power Cord - CR190

Article ID: ART106992 | Date published: 05/11/2015 | Date last updated: 11/12/2015


Connect the power cord.


Connect the power cord. Make sure to use only the power cord provided with the scanner.

When connecting the power cord, follow these precautions.
Failure to do so may cause a fire or electrical shock.

  • Never grasp the power plug when your hands are wet.
  • Never plug the scanner into a multiplug power strip.
  • Never bundle or tie the power cord around itself or another object. Connect the power cord securely into the power outlet.
  • Use only the power cord and power plug provided with the scanner.
  • Before you connect the power cord, make sure to turn OFF the power switch.
  • Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region).
  • Do not plug the scanner into a power outlet shared with another device. If you use an extension cord, make sure that the extension cord is rated for the current requirements of the scanner.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments