Procedure for using Auto Play (Slide Shows) on the EOS Digital Rebel T2i

Article ID: ART107011 | Date published: 05/11/2015 | Date last updated: 02/05/2016


Slide Show (Auto Playback)

You can playback the images in the card as an automatic slide show.

1 Select [Slide show].
  • Under the [] tab, select [Slide show], then press <>.
2 Select the images to be played back.
  • Press the <> key to select the top menu item, then press <>. Press the <> key to select one of the following: []. Then press <>.
  • If you selected [], press the <DISP> button while <> is highlighted.
  • The [Select date] screen will appear. Press the <> key to select the date, then press <>.

3 Set the play time and repeat option.
  • Press the <> key to select [Setup], then press <>.
  • For still photos, set the [Display time] and [Repeat] options, then press the <MENU> button.

4 Start the slide show.
  • Press the <> key to select [Start], then press <>.
  • After [Loading image...] is displayed, the slide show will start.

5 Quit the slide show.

  • To quit the slide show and return to the setting screen, press the <MENU> button.
  • To pause the slide show, press <>. During pause, [] will be displayed on the upper left of the image. Press <> again to resume the slide show.
  • During auto playback, you can press the <DISP> button to change the still photo display format.
  • During movie playback, you can adjust the sound volume by turning the <>.
  • During pause, you can press the <> key to view another image.
  • During the slide show, auto power off will not take effect.
  • The display time may vary depending on the image



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments