This section explains the details on how to set the peaking (emphasizing the outline of objects) color, gain, and frequency.
Note: There are two peaking levels: [
Peaking 1] and [
Peaking 2]. You can press the <
MENU> button to display the [
LCD/VF Setup] menu, and then press [
Select] to switch between the peaking levels.
Hold down the button on the <
POWER> switch and move it to <
CAMERA>.

Setting the peaking color
- Press the <MENU> button.

- Select [LCD/VF Setup] -> [Peaking 1] -> [Peaking 2] in that order.
- Push the <joystick> up/down or turn the <SELECT> dial to select the desired submenu, and then press <SET>.


- Select the color and then press <SET>.
- [White], [Red], [Yellow], [Blue]

- Press the <MENU> button to close the menu.
Setting the peaking gain
- Press the <MENU> button.
- Select [LCD/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

- Select [Gain], and then select [Off] or any value between [1] to [15].

- Press the <MENU> button to close the menu.
Setting the peaking frequency
- Press the <MENU> button.
- Select [LCD/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

- Select [Frequency], and then select from [1] to [4].

- Press the <MENU> button to close the menu.