Clean the fixing unit
Cleaning the Fixing Unit
In the following cases, the fixing unit may be dirty. Clean the fixing unit.
- When black streaks appear on the printed paper
- When a toner cartridge is replaced
1. Press [
] (Menu).
2. Press [
] or [
] to select <Adjustment/Maintenance>, and then press [OK].
3. Press [] or [] to select <Clean Fixing Unit>, and then press [OK].
4. Load Letter size plain paper in the multi-purpose tray, and then press [OK].
The cleaning process will start. Cleaning takes approximately 90 seconds.
* It is recommended that you load plain paper when cleaning the fixing unit.
NOTE:
If cleaning does not begin
- When there are jobs stored in memory, this function is not available.
5. Press [] (Menu) to close the menu screen.
Precautions When Cleaning the Machine
Before cleaning the machine, check the following.
- Ensure no jobs are stored in memory, then turn OFF the power switch and disconnect the power cord.
- Use a soft cloth to avoid scratching the components.
- Do not use tissue paper, paper towels, or similar materials for cleaning. They can stick to the components or generate static charges.
Attention:
Precautions when cleaning the feeder
- Do not dampen the cloth too much, as this may tear the document or damage the machine.
Precautions when closing the feeder
- Be careful not to get your fingers caught.
Do not touch the fixing unit (A).
- Touching the fixing unit (A) may cause burns as it becomes very hot during use.
Precautions if you get toner on your hands or clothing
- If toner gets on your hands or clothing, wash them immediately with cold water.
- Washing with warm water sets the toner, making it impossible to remove the toner stains.
Important:
Do not touch the transfer roller (A).
- Touching the transfer roller (A) may damage the machine.
NOTE:
Sending or receiving faxes
- When the power plug is unplugged, the machine cannot send or receive faxes.
If there is data waiting to be printed
- The data is deleted when you turn OFF the power switch.
Data received in memory, reserved sending data, etc.
- They can be kept for approximately 5 minutes after the power plug is unplugged.
