Ask a Question

Replace the ink tank(s) - iP4820

Article ID: ART107291 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

Replace the Ink Tank(s)

  • When you need to replace ink tanks, follow the procedure below.

    Important

    Handling Ink

    If you remove an ink tank, replace it immediately. Do not leave the printer with ink tanks removed.

    Use new ink tanks for replacement. Installing used ink tanks may cause the nozzles to clog. Furthermore, with such ink tanks, the printer will not be able to inform you when to replace the ink tanks properly.

    Once an ink tank has been installed, do not remove it from the printer and leave it out in the open. This will cause the ink tank to dry out, and the printer may not operate properly when it is reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use.
    Note

    Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.

    Every ink is also consumed in the standard cleaning and deep cleaning of the Print Head, which may be necessary to maintain the printer's performance. When an ink tank is out of ink, replace it immediately with a new one.

    1. Make sure that the power is turned on, and open the Paper Output Tray gently.

    1. Open the Top Cover. The Print Head Holder moves to the replacement position.

    Caution

    Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder until it stops completely.
    Important

    Do not place any object on the Top Cover. It will fall into the Rear Tray when the Top Cover is opened and cause the printer to malfunction.

    Do not touch the metallic parts or other parts inside the printer.

    If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Top Cover.

    Do not open the Inner Cover (A) when replacing the ink tank. If the Inner Cover (A) is open after replacing the ink tank, be sure to close it.

    1. Remove the ink tank with the lamp flashing fast. Push the tab (B) and lift the ink tank to remove. Do no touch the Print Head Lock Lever (C).

    Important

    Handle the ink tank carefully to avoid staining of clothing or the surrounding area.

    Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables.
    Note

    Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks.

    1. Prepare the new ink tank.

    (1) Take a new ink tank out of its package, remove the orange tape () completely, then remove the protective film () completely.



    Important

    Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.

    If the orange tape remains on the L-shape air hole(D), ink may splash or the printer may not print properly.

    (2) Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the L-shape air hole (D).



    (3) Slowly twist the orange protective cap (E) 90 degrees horizontally to remove it off.



    Important

    Do not push the sides of the ink tank. If you push the sides of the ink tank with the L-shape air hole (D) blocked, ink may splash.

    Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them.

    Do not reattach the protective cap (E) once you have removed it. Discard it according to the local laws and regulations regarding disposal of consumables.

    1. Install the new ink tank.

    (1) Insert the front end of ink tank into the Print Head at a slant. Make sure that the position of the ink tank matches the label.



    (2) Press the mark (Push) on the ink tank until the ink tank snaps firmly into place.

    Make sure that the ink lamp lights up red.



    Important

    You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the Print Head Holder.

    You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.

    1. Close the Top Cover.

    Note

    If the Alarm lamp still flashes orange after the Top Cover is closed, refer to "Alarm Lamp Flashes Orange" in "Troubleshooting" of the on-screen manual: Advanced Guide.

    When you start printing after replacing the ink tank, the printer starts cleaning the Print Head automatically. Do not perform any other operations until the printer completes the cleaning of the Print Head. While cleaning is in progress, the POWER lamp is flashing green.

    If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head position.



SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments