Connect the USB interface cable to the MP495 / MP499
Article ID: ART107302 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

The USB cable must connect from the device directly to the MP495 / MP499

Solution

Connect the USB cable to the Printer

If the computer does not detect the printer, ensure the USB cable connects directly to the printer. If the printer is connected to the computer via a USB splitter, disconnect the cable from the splitter and connect it directly to computer.

Note: Scanning via a network using the machine's operator panel is not available

  1. Connect the flat end of the USB cable to the computer (type-A receptacle).

  2. Connect the other end of the cable to the printer (10) (type-B receptacle).

    Note: The USB connector will only fit in one-direction into the type-B receptacle on the printer. Please ensure the connector is oriented properly before inserting it into the printer.

SIMS Doc Id

0