Setting the language using the PowerShot SX210 IS.
Article ID: ART107415
|
Date published: 05/11/2015
|
Date last updated: 08/15/2015
Solution
You can change the language displayed in the LCD monitor menus and messages.
Attention:
In this section, [PowerShot SD940 IS] is used as an example to explain the operations. Depending on your model, the position of buttons, screen indications, and setting items may vary.
1. Press the <Playback> () button to turn on the camera.
2. Hold down the <FUNC./SET> () button, and press the <MENU> () button immediately.
3. The following screen will appear on the LCD monitor.
Operate the <Directional buttons> to select a target language.
After a language is selected, press the <FUNC./SET> () button.
Note:
The clock will appear if too much time passes between pressing the <FUNC./SET> () button and the <MENU> () button in Step 2. If the clock appears, press the <FUNC./SET> () button to remove the clock and repeat Step 2.
You can also change the display language by pressing the <MENU> () button, choosing the [Set up] () tab, and choosing the [Language] menu item.