How to use the trimming function using the PowerShot SD3500 IS.

Article ID: ART107537 | Date published: 05/11/2015 | Date last updated: 08/15/2015



You can trim a required portion of a recorded image and save it as new image file.

1. Press the <MENU> button in playback and select [Trimming].

2. Select and image using the or .

3. Adjust the trimming area:

  • A green frame will appear around the portion of the image to be trimmed.
  • The original image will display in the upper left, and the image after trimming will display in the lower right.
  • If you move the zoom lever to the left or right, you can change the size of the frame.

4. Save as a new image and display the image.

  • Images that have been resized using the camera cannot be trimmed.
  • The width and height ratio of an image that can be changed is fixed at a 4:3 aspect ratio (for a vertical image 3:4).
  • The number of recorded pixels of an image that has been trimmed will be smaller than the image before trimming.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments