When the built-in memory becomes full while you are recording a movie, the camcorder can automatically continue recording the movie to the memory card, as long as the relay recording function is activated. However, the relay recording function is not available to automatically continue recording movies to the built-in memory when the memory card is full.

Confirm the following information regarding the relay recording settings.

• If you are using , the relay recording function cannot be used.
• If the [memory card] is selected for movie recording, the relay recording function cannot be activated. Change the setting to [built-in memory] for movie recording.

1. Insert a memory card that does not contain any movies. If there is any scene recorded on the card, relay recording cannot be made.
   When the power is off, insert a memory card, and then close the cover.
   
   
   
   
2. Set the mode switch to < M >.
   
   
   
   
3. Turn on the camcorder.
   
   
   
   
4. Touch [ ].
   
   
   
   
5. Touch [ MENU ].
   
   
   
   
6. Touch [ ].
   
   
   
   
7. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.
   
   
   
   
8. Touch [ ] (built-in memory).
   
   
   
   
9. Touch [ Relay Recording ].
   
   
   
   
10. Touch [ ].
    
    
    
    
11. Touch [ ] to close the menu.
    
    

Attention:

• Any of the following actions will deactivate the relay recording function:
  - Turning off the camcorder.
  - Opening the memory card slot cover.
  - Changing the position of the mode switch.
  - Changing the camcorder's operating mode.

• Relay recording cannot be made in the following situations.
  - If there is any scene recorded on the memory card.
  - If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy movies to the memory card.