Adjusting Copy Density
You can adjust the density to the most appropriate level for the document either automatically or manually.
The default settings is <Manual> (5).
Please select an option below:
You can adjust the density to the most appropriate level for the document automatically.
1. Place documents.
2. Press [COPY].
3. Press [Density] twice to select <AUTO>, then press [OK].
The image quality is automatically set to <TEXT>.
4. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
5. Press [Start].
If you want to copy multiple documents using the platen glass, place a document and press [START] once for each page. When scanning is complete, press [OK].
Top
You can adjust the density to the most appropriate level for the document manually.
1. Place documents.
2. Press [COPY].
3. Press [Density] to select the manual mode.
4. Press [] or [] to adjust the copy density, then press [OK].
- []: to make light documents darker
- []: to make dark documents lighter
Note:
- To cancel all settings, press [Stop/Reset].
- When you switch the mode by pressing the mode keys such as [FAX], all settings will be canceled. If you want to keep the settings, set the density as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <DENSITY> -> <MANUAL>.
5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
6. Press [Start].
If you want to copy multiple documents using the platen glass, place a document and press [START] once for each page. When scanning is complete, press [OK].
Top