Ask a Question

Inserting the Date into Images (Date Stamp) (PowerShot S95)

Article ID: ART107917 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

These instructions explain how to insert the date in images.

Attention:
  • The Date Stamp cannot be deleted from the image data once it has been recorded because the date is written in as an image.
  • In the following shooting modes, you cannot add a date to the images (Date Stamp).

- Movie (), Low Light (), Easy ()

1. Set the <Mode Switch> to a setting other than Movie (), Press the <Power> button on the camera.

2. Press the <MENU> () button.

3. The following screen will appear on the LCD monitor.

Operate the <directional button> to select the Shooting () tab.

Operate the <directional button> to set Date Stamp to Date or Date & Time.

After making these settings, press the <MENU> () button.

4. If you set Date Stamp, DATE will appear on the LCD monitor.

If DATE does not appear, press the <DISP.> () button to switch the screen display.

5. When shooting with this setting, the date will be embedded in the image as shown below.

Date

Date & Time

Warning:

The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with Date Stamp cannot be deleted.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments