Inserting or removing the USB Flash Drive MG6120

Article ID: ART108156 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Inserting or removing the USB Flash Drive MG6120

Solution

note:

Before inserting the USB flash drive

  • If your USB flash drive cannot be inserted into the Direct Print Port of the machine, you may be required to use an extension cable for the USB flash drive. Purchase it at electronics retail stores.
  • Some USB flash drives may have recognition problem, and these devices may not guarantee proper operation of the machine.
  • You may not be able to use USB flash drives with security function.





Inserting the USB Flash Drive

Insert the USB flash drive into the Direct Print Port.

Make sure that the USB flash drive is correctly oriented before inserting it straightforward into the Direct Print Port.

Removing the USB Flash Drive

1. Make sure that the machine is not reading or writing data from/to the USB flash drive.

Check if the reading or writing operation is completed on the LCD.

important:

Do not remove the USB flash drive or turn off the power while the machine is operating.




note:

If your USB flash drive has the access lamp, refer to the instruction manual supplied with the USB flash drive to check if the reading or writing operation is completed on the USB flash drive.




2. Remove the USB flash drive.

Hold the USB flash drive and remove it straightforward from the machine.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments