Autofocus may not work well on the following subjects. In such case, focus manually.

Adjust the zoom before you start the procedure.

Manual Focus Adjustment

1. Set the mode switch to <M>.
   
   
   
   
2. Turn on the camcorder.
   
   
   
   
3. Touch [ ].
   
   
   
   
4. Touch [ Focus ].
   
   
   
   
5. Bring the camcorder into focus.
   5-1. Touch a subject that appears inside the frame.
   - The [ ] button turns to [ ], and then the [ ] and [ ] buttons appear.
   - The Touch AF mark [ ] will flash and the focusing distance will be adjusted automatically.
   
   
   
   
   Reference:
   It is also possible to focus on a subject by touching the [ ] button along with the [ ] and [ ] buttons instead of touching the subject.
   
   5-2.To achieve focus more precisely, touch the [ ] or [ ] button to make fine adjustments.
   When the [Focus Assistance] setting is [On], the center of the screen will be magnified.
   For your reference, the focal distance to an in-focus subject in the scene appears during operation for a few seconds.
   
   Note:
   If you wish to focus on faraway subjects such as mountains or fireworks, touch and hold [ ] until the focusing distance changes to [ ].
   
   
6. Touch [ ] to lock the focus at the selected distance.
   - During manual focus, [MF] will appear on the screen.
   
   
   
   To return to autofocusing, carry out steps 3 and 4 again, and then touch the [ ] button.
   
   Note:
   While the optional Wide-converter or Tele-converter is attached, the focusing distance displayed will be incorrect.