Redistribute the toner (LBP6650)

Article ID: ART108784 | Date published: 05/11/2015 | Date last updated: 08/16/2015


Redistribute the toner


Redistribute the toner

Take the toner cartridge out of the printer, shake it gently five or six times to evenly distribute the toner, and then reinstall the toner cartridge.

If the messages <16 PREPARE TONER> and <16 CHECK TONER> appear or if white streaks, unevenness, or faded print appears on printout results, perform the following procedure before replacing the toner cartridge. You may be able to print for a while until the toner is used up completely.

1. Open the front cover while pressing the open button.

2. Remove the toner cartridge.

3. Shake the toner cartridge five or six times as shown in the figure to evenly distribute the toner inside the cartridge.

4. Install the toner cartridge.

Push the toner cartridge into the printer firmly until it touches the back of the printer while aligning (A) on sides of the toner cartridge with the toner cartridge guides inside the printer.

5. Close the front cover.

If you cannot close the front cover
Make sure that the toner cartridge is installed in the printer properly. Do not try to forcefully close the front cover, as this may damage the printer.

If white streaks, unevenness, or faded print appears on printout results even after performing the above procedure, replace the toner cartridge with a new one.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments