With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. To set up, use the card and to troubleshoot any image transfer problems, refer to the Eye-Fi card's instruction manual or inquire the card's manufacturer.

This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer

	1 Insert an Eye-Fi card.
	2 Select [Eye-Fi settings]. Under the [] tab, select [Eye-Fi settings], then press <>. This menu is displayed only when an Eye-Fi card has been loaded in the camera.
	3 Enable the Eye-Fi transmission. Press <>, set [Eye-Fi trans.] to [Enable], then press <>. If you set [Disable], automatic transmission will not occur even with the Eye-Fi card loaded (Transmission status icon ).
	4 Display the connection information. Select [Connection info.], then press <>.
	5 Check the [Access point SSID:]. Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card's MAC address and firmware version. Press the <M> button three times to exit the menu.
	6 Take the picture. The picture is transferred and the <> icon switches from gray (Not connected) to the icons below. For transferred images, is displayed in the detailed information display

Cautions for Using Eye-Fi Cards

• If "" is displayed, an error occurred while retrieving the card information. Turn the camera off and on again.
• Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.
• If the image transfer does not work, check the Eye-Fi card and personal computer settings. For details, see the card's instruction manual.
• Depending on the wireless LAN's connection conditions, the image transfer may take longer or might be interrupted.
• Because of the transmission function, the Eye-Fi card may become hot.
• The battery power will be consumed faster.
• During the image transfer, auto power off will not take effect.