Procedure to enable/disable ECM Receiving

The ECM (Error Correction Mode) is the function to detect and correct errors during fax communication. Using the ECM function can diminish sending errors even in a poor telephone line state.

NOTE:

Check the settings for the recipient's machine also.
The ECM function is available only when the settings for the machine and recipient's machine are effective.

Even if the ECM function is effective
An error may occur due to the telephone line.

When the ECM function is effective
It may take time to receive documents if a problem occurs to the telephone line.

1. Press [] (Menu).

2. Press [] or [] to select <Send/Receive Settings>, then press [OK].

3. Press [] or [] to select <Fax Settings>, then press [OK].

4. Press [] or [] to select <Receive Settings>, then press [OK]

5. Press [] or [] to select <ECM Receiving>, then press [OK].

6. Press [] or [] to make your select, then press [OK].

Settings
(Boldface: Default Settings)

Off	Does not use the ECM function.
On	Uses the ECM function.

7. Press [] (Menu) to close the menu screen.