Settings

The basic steps to access menus and setting items:

1. Make sure that the machine is turned on.
   
   
2. Press the Menu button repeatedly until Device settings appears.
   
   
3. Use the button to select the desired setting, then press the OK button.
   
   
4. Similarly, use the button and the OK button to select and change the options for the item selected .
   
   

• Prevent abrasion
  
  Use this setting only if the print surface becomes smudged.
  OFF/ON
  
  Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
  
  
  
• Extended copy amt.
  
  Selects the amount of image that extends off the paper when copying in Borderless (full). Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

  Amount: Small / Amount: Large
  
  Cropped area will be larger if Amount: Large is selected.
  
  If printouts contain margins even though you are copying in Borderless, specifying Amount: Large for this setting may help solve the problem.
  
  
  

• AutoPhotoFix setting
  
  When ON is selected, you can print photos using the Exif information recorded in the image files. When you print photos using the Exif information, set the print settings to Default on the PictBridge compliant device, and select Auto photo fix ON for Auto photo fix in PictBridge settings
  
  
  

LAN settings

• WLAN active/inactive
  
  Activates/deactivates wireless LAN.
• Wireless LAN setup
  
  Selects the setting method for wireless LAN connection.
  • Easy setup
    
    Select when you perform settings for wireless LAN manually using the Operation Panel of the machine.
    
    Note:
    
    If you perform settings for wireless LAN from the computer, refer to your setup manual.
    
    
  • WPS
    
    Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method or PIN code method according to the method your access point supports, then follow the on-screen instructions.
    
    
  • WCN
    
    Select when you perform settings for wireless LAN using Windows Connect Now (WCN) feature. You need a USB flash drive on which settings for wireless LAN are saved.
    
    
• Print LAN details
  
  You can print out the network settings of the machine such as its IP address and SSID.
  
  Important:
  
  This print out contains valuable information about your computer. Handle it with care.
  
  
• Other settings
  
  
  • Set printer name
    
    Specifies the printer name. You can use up to 15 characters for the name.
    
    Note:
    
    You cannot use the same printer name as that already used for other LAN connected devices.

    You cannot use a hyphen for the initial or last character of the printer name.

  • IPv4/IPv6 setting
    
    Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
  • WSD setting
    
    Activates/deactivates the WSD (one of the network protocols supported in Windows 7 and Windows Vista) setting.
    
    Note:
    
    When this setting is activated, the printer icon is displayed on the Network Explorer in Windows 7 and Windows Vista.
  • LLTD setting
    
    Activates/deactivates the Link Layer Topology Discovery (LLTD) setting. When this setting is activated, Network Map for Windows 7 or Windows Vista is available.
  • Bonjour settings
    
    Setting items for LAN using Bonjour for Macintosh.
    
    Enab./disab. Bonjour
    
    Selecting Active allows you to use Bonjour to perform the network settings.

    Enter service name
    
    Specifies the Bonjour service name. You can use up to 48 characters for the name.
    
    Note:
    
    You cannot use the same service name as that already used for other LAN connected devices.
    
    LPR serv. advertising
    
    Selects whether to advertise the Line PRinter daemon protocol (LPR) service using Bonjour.
    
    Note:
    
    Select ON for this setting and Active for LPR setting to advertise the Line PRinter daemon protocol (LPR) service.

  • LPR setting
    
    Activates/deactivates the LPR setting.
    
    
• Reset LAN settings
  
  Initializes the network settings on the machine.
  
  Important:
  
  Note that initialization erases all connection settings with computers, and printing or scanning operation may become impossible. To use the machine over network, refer to your setup manual. Be careful when you initialize the network settings on the machine.

Device user settings

Page top

Mobile phone settings

When printing from a mobile phone through Bluetooth communication, select the page size, media type, layout, and so on.

Note

Mobile phone settings is displayed only when the optional Bluetooth Unit is attached.

• Page size

  Select the page size for printing photos saved on a mobile phone.
  
  

• Media type

  Select the media type for printing photos saved on a mobile phone.
  
  

• Image optimizer

  Select ON to correct and smooth out the jagged contours when printing.
  
  

• Layout

  Select the layout of the photos according to the paper for printing.

  Sticker print:
  
  Stickers x16

  Printing on paper other than sticker:
  
  Borderless/Bordered/Borderless x2/Bordered x2/
  Borderless x4/Bordered x4/Borderless x8/Bordered x8/
  Mixed 1/Mixed 2/Mixed 3
  
  

  Note
  
  Mixed 1, Mixed 2, or Mixed 3 can be selected only when the page size is set to A4 or 8.5"x11"(LTR).

  Page top

Bluetooth settings

You can change the device name of the machine, passkey, and so on in the Bluetooth settings.

Note

Bluetooth settings is displayed only when the optional Bluetooth Unit is attached.

• Device name

  Specifies the name of this machine that is displayed on a Bluetooth-compatible device.

  For example, if you set it to XXX-2, the machine will be displayed as "Canon XXX-2" on the Bluetooth device. The default value is XXX-1 (where "XXX" is your machine's name).
  
  

• Access refusal

  Selecting ON will disable searching of this machine by a Bluetooth-compatible device.
  
  

• Security settings

  When you select Enable, the passkey set on the Passkey screen becomes effective. Setting the passkey prevents unwanted access from other Bluetooth devices. You can choose either of the security modes below.
  

  Mode 3(recommended)

  This mode is activated on link level enforced security.

  The passkey will be required when a Bluetooth device communicates with the machine.

  Normally select this mode.
  

  Mode 2

  This mode is activated on service level enforced security.

  The passkey will be required when printing through Bluetooth communication.

  After setting the security mode, we recommend making a trial print through Bluetooth communication.

• If printing does not start, change the security mode and try again.
  
  

• Passkey

  Changes the passkey. The passkey is a four-digit number used to prevent unwanted access from other Bluetooth devices.

  The initial value is "0000".

  After you change the passkey, you may be required to input the new passkey on a Bluetooth device, even though it had previous access to the machine. In this case, enter the new passkey on the device.

  Page top

PictBridge settings

You can change the print settings when printing from a PictBridge compliant device.
Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine

• Page size

  Select the page size when printing directly from a PictBridge compliant device.

  When you perform PictBridge settings from the machine, set Paper size to Default on the PictBridge compliant device.
  
  

• Media type

  Select the media type when printing directly from a PictBridge compliant device.

  When you perform PictBridge settings from the machine, set Paper type to Default on the PictBridge compliant device.
  
  

• Print quality

  Select the print quality when printing directly from a PictBridge compliant device.
  
  

• Borderless print

  Select bordered or borderless print.

  When you perform PictBridge settings from the machine, set Layout to Default on the PictBridge compliant device.
  
  

• Auto photo fix

  When Manual correction is selected, the setting items below can be specified.

  Vivid

  Makes green and blue more lively.

  Photo optimizer

  Automatically optimizes the brightness and tone of a photo.

  Noise reduction

  Reduces the noise on blue areas like the sky as well as on black areas.

  Face brightener

  Brightens a darkened face on a photo taken against the light.

  Red-Eye corr.

  Corrects red eyes in portraits caused by flash photography. This setting is also available when Auto photo fix ON is selected.
  Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.
  

  Page top

Reset setting

Reverts all settings you made to the machine back to default. However, some data may not be changed, depending on the current usage state of your machine.

• Telephone no. data

  Reverts the telephone number settings to default.
  
  

• Setting data

  Reverts the machine settings other than the telephone number settings to default.
  
  

• All data

  Reverts the telephone number and machine settings to default.

  Note

  You cannot change the following setting items back to the default:

  The language displayed on the LCD

  The current position of the Print Head

  LAN settings*

  * You can change LAN settings back to the default from Reset LAN settings in LAN settings.

  The country selected for Country select

  The registered user's telephone number

  The registered user's name

Page top