1. Confirm that the printer is powered on.
   
   
   
   
2. Pull open the paper output tray.
   
   
   
   
3. Lift the Scanning Unit (Cover), then hold it open with the Scanning Unit Support (A).
   
   
   
   
   
   Note: When the scanning unit (printer cover) is opened more than ten minutes, the print head moves to the right side. If this occurs, close the scanning unit (printer cover), and open it again.
   
   
   
   
   Important : Do not touch the metallic parts or other parts inside the machine.
   
   Do not place any object on the Document Cover. It will fall into the Rear Tray when the Document Cover is opened and cause the machine to malfunction.
   
   Do not hold the LCD or the Operation Panel.
   
   If the Document Cover is open, you cannot open the Scanning Unit (Cover). Be sure to lift the Scanning Unit (Cover) with the Document Cover closed.
   
   
4. Remove the ink tanks by pressing the tab of each tank.
   
   Caution: Handle the ink tanks with care so that your clothes and surrounding area do not get soiled. Make sure to remove the ink tanks one by one.
   
   Push the tab (B) and lift the ink tank to remove.

   Do not touch the Print Head Lock Lever (C).

   
   
   
   
   

Click to return to the top.

Removing the Print Head

1. Raise the print head lock lever.
   
   
2. Tilt the print head slightly towards the front of the machine and lift out gently.
   
   
   
   
   Caution: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply ports <3>. Doing so may cause printing problems.