Shooting with Focus Lock on the EOS REBEL T3.

Article ID: ART109316 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Description

Shooting with Focus Lock on the EOS REBEL T3.

Solution

With [One-Shot AF], while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called "focus lock".

It is an effective method for shooting scenes with close and distant subjects, such as animals in a cage and people in front of a landscape.

Example of Focus Lock

In normal autofocus settings, if you want to take a picture by focusing on the nearest flower, the focus is usually on the leaves at the center as shown in the left picture.

In such cases, use Focus Lock to focus on the target subject as shown in the right picture.

Shooting with Focus Lock

1. Set the power switch to <ON>.

2. Set the lens focus mode switch to <AF>.

3. Press the <AF>(AF mode selection) button.

4. Press the <Cross Keys> to set the AF mode to [ONE SHOT] (One Shot AF), then press <SET> button.

5. Press the shutter button halfway to autofocus.

When focus is achieved, the AF point which achieved focus will be displayed, and the focus confirmation light [ ] in the viewfinder will also light.

6. Recompose the picture, while pressing and holding the shutter button halfway down.

7. Press the shutter button completely to take the picture.

Note:

Focus may not be achieved if the distance between the subject and the camera changes after the focus is locked.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments