Selecting the Memory for the Recordings with the XA10

Article ID: ART109472 | Date published: 05/11/2015 | Date last updated: 08/17/2015


You can select to record your movies and photos in the built-in memory or on a memory card.

  1. Set the mode switch to <M> or <CINEMA>.

  2. Turn on the camcorder.

  3. Touch [ ].

  4. Touch [ ].

  5. Touch [ ].

  6. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.

  7. Touch [ ] (built-in memory), [ ] (memory card A) or [ ] (memory card B).

  8. Touch [ ] to close the menu.
    - When the built-in memory or card A is selected, you can select [Relay Recording].
    - [Relay Recording] is a function where the recording destination automatically switches from the built-in memory or card A to a card B when the built-in memory or card A becomes full.


  • Select to record movies in the built-in memory or memory card A if you later want to convert the movies to standard definition in order to upload them to the Web.

  • When selecting the memory, you can check the approximate available recording time/number of photos, based on currently used settings.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments