You can activate relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.

When recording in the built-in memory, you can choose to use only memory card A for relay recording ( ), or use memory cards ( ). When recording on memory card A, you can use memory card B for relay recording ( ).

Confirm the following information regarding the relay recording settings.

Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.

• When relay recording from the built-in memory: memory card slot or memory card slots.
• When relay recording from memory card A: memory card slot only.

• You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .
• During Story Creator mode, relay recording and double slot recording are not available.

1. Set the mode switch to <M> or <CINEMA>.
   
   
2. Turn on the camcorder.
   
   
3. Touch [ ].
   
   
   
   
4. Touch [ ].
   
   
   
   
5. Touch [ ].
   
   
   
   
6. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.
   
   
   
   
7. Touch [ ] or [ ].
   
   
   
   
8. Touch [Relay Recording].
   
   
   
   
9. Touch [ ] or [ ].
   - If [ ] was selected in Step 8, then you can only choose [ ].
   
   
   
   
10. Touch [ ] to close the menu.
    

Note:

• There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.

• Any of the following actions will deactivate the relay recording function:
  - Turning off the camcorder.
  - Opening the double memory card slot cover.
  - Changing the position of the mode switch.
  - Changing the camcorder's operating mode.
  - Changing the memory used for recording movies.