User information settings

Registers your name and fax/telephone number printed on sent faxes.

Telephone line type

Selects the telephone line type setting for the machine.

Note

• This setting may not be available depending on the country or region of purchase.

Auto redial

Enables/disables automatic redialing.

If you select ON, you can specify the maximum number of redial attempts and the length of time the machine waits between redial attempts.

Dial tone detect

Avoids mistransmission when reception and transmission occur at the same time.

If you select ON, the machine transmits the fax after confirming the dial tone.

Note

• This setting may not be available depending on the country or region of purchase.

Pause time settings

Sets the length of time paused for each press of the Redial/Pause button.

TTI position

Selects the position of the sender information (outside or inside the image area).

Remote RX

Enables/disables remote reception.

If you select ON, you can specify the remote reception ID.

Color transmission

When faxing color documents using the ADF, selects whether to convert them into black & white data if the recipient's fax machine does not support color faxing.

If you select Disconnect, the machine does not send color documents when the recipient's fax machine does not support color faxing.

RX image reduction

Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.

If you select ON, you can select the image reduction direction.

Adv. communication settings

Received documents

Selects whether to print the received fax automatically when receiving a fax.

If you select Do not print, the received is stored in machine's memory.

Activity report

Selects whether to print the Activity report automatically.

If you select Print, the machine prints the report for the 20 histories of sent and received faxes automatically.

TX report

Selects whether to print the TX report automatically after sending a fax.

If you print the TX report, select Print error only or Print for each TX.

If you select Print error only or Print for each TX, you can specify the print setting that the first page of the fax is printed along with the report.

RX report

Selects whether to print the RX report automatically after receiving a fax.

If you print the RX report, select Print error only or Print for each RX.

Print when out of ink

Sets whether to continue printing the received fax without storing it in machine's memory when the ink has run out.

However, part or all of the fax may not be printed since the ink has run out.

FAX number re-entry

If you select ON, you can set the machine to send faxes after using the Numeric buttons to dial the number twice. By using this setting, you can avoid the mistransmission of faxes.

Check RX FAX information

If you select ON, the machine checks whether the recipient's fax machine information matches the dialed number. If it matches the number, the machine starts to send faxes.

Hook key setting

If you select Enable, you can use the Hook button.

FAX reception reject

If you select ON, the machine rejects the reception of faxes with no sender information or faxes from specific senders.

Caller rejection

If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID does not match the conditions specified in this setting, the machine rejects the phone call or fax reception from the sender.

If you select Yes on the subscribing confirmation screen, you can specify the settings of rejection.

Note

• This setting may not be supported depending on the country or region of purchase. Contact your telephone company to confirm whether it provides this service.