Reset the IX7000 printer
Article ID: ART109643 | Date published: 05/11/2015 | Date last updated: 08/17/2015


Reset the IX7000 printer


Resetting the Printer

By resetting the printer's power, the print buffer is cleared and certain sensors are reset. If there is invalid data in the buffer, or sensors are stuck in a particular mode; errors may occur.

Follow these steps to reset the printer:

  1. Turn the printer off with the Power button.

  2. Disconnect the data cable from the printer (not applicable to Bluetooth ) .

  3. Unplug the printer's power cord for a few seconds, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable.
    Note: If the power cord is plugged into a surge protector, it may be necessary (for testing purposes) to plug the cord directly into the wall outlet if possible.

  4. Turn the printer back on.

  5. Retry the operation

Note: If resetting the printer does not work, please attempt any other solutions that appeared in your search results.If this is a hardware error on the printer, the printer may need to be repaired.