How to set High-Speed Continuous Shooting (High-speed Burst) and Group Playback (PowerShot ELPH 300 HS / 100 HS, IXUS 220 HS / 115 HS).
Article ID: ART109883 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Solution

How to set High-Speed Continuous Shooting (High-speed Burst)You can shoot continuously while the shutter button is pressed and held down fully.
For the PowerShot ELPH 300 HS / IXUS 220 HS, the maximum speed for continuous shooting is approximately 8.2 images/second, and for the PowerShot ELPH 100 HS / IXUS 115 HS, the maximum speed for continuous shooting is approximately 8.0 images/second.

Note:

  • Recording pixels are fixed to 1984 x 1488 pixels ().
  • Focus, exposure and white balance settings are set with the first shot.
  • Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
  • As the number of images increases, the shooting interval may take longer.
  • [ISO speed] is set to [AUTO] ().
  • The main functions that are not available in the [High-speed Burst] () mode are as follows:

- [Flash] (), [Date Stamp], [Self-Timer] ()

For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.

1. Set the <Mode Switch> to [Shooting] () and then press the <Power> button.

2. Press the <FUNC./SET> () button.

3. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select the [Rec. Mode]. (If no changes have been made so far, [Program AE] () will be displayed.)

Press the <FUNC./SET> () button.

4. Operate the <directional buttons> up or down to select the [High-speed Burst] ().

Press the <FUNC./SET> () button.

5. The following screen appears on the LCD monitor.

If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.

As long as you hold the down, the camera will shoot successive images.Viewing Each Image in a Group (Group Playback)

When playing back images, images taken in [High-speed Burst]()mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.

Important:
  • If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
Reference:
  • To view images taken in [High-speed Burst] () mode as a group, press <MENU> (), and then select [On] for [Group Images] in the [Playback Menu]() tab. (By default, [On] is selected.)


1. Press the <Playback> () button.

2. The last captured image will appear.

Operate the <directional buttons> left or right to choose an image that displays ()

3. The following screen appears on the LCD monitor.

Press the <FUNC./SET> () button.

4. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to choose [Group Playback](), then press the <FUNC./SET>() button again.

5. The following screen appears on the LCD monitor.

Operate the <directional buttons> left or right to view images in the group individually.

To quit Group Playback, press the <FUNC./SET> button (), press the <directional buttons> up or down to select [Exit Group Playback] (), and then press the <FUNC./SET> button ().

SIMS Doc Id

0