Ask a Question

How to set High-Speed Continuous Shooting (High-speed Burst) and Group Playback (PowerShot SX230 HS / SX220 HS)

Article ID: ART109990 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Solution

How to set High-Speed Continuous Shooting (High-speed Burst)

You can shoot continuously at a maximum speed of approximately 8.1 images/second while the <shutter button> is pressed fully and held.

note:

  • Recording pixels are fixed to 1984 x 1488 pixels ().
  • Focus, exposure and white balance settings are set with the first shot.
  • Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
  • As the number of images increases, the shooting interval may take longer.
  • [ISO speed] is set to [AUTO] ().
  • The main functions that are not available in the [High-speed Burst] () mode are as follows:

- [Flash] (), [Date Stamp], [Self-Timer] ( )

For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.


1. Press the <Power> button and Set the <Mode Dial> to ().


2. Press the <FUNC./SET> () button.


3. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [Rec. Mode] (If no changes have been made so far, [Smart Shutter] () will be displayed).

Press the <FUNC./SET> () button.


4. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [High-speed Burst] ().

Press the <FUNC./SET> () button.


5. The following screen appears on the LCD monitor.

If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.

As long as you hold the <shutter button> down, the camera will shoot successive images.

Viewing Each Image in a Group (Group playback)

When playing back images, images taken in [High-speed Burst]() mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.

important:

If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.


reference:

  • To view images taken in [High-speed Burst] () mode as a group, press <MENU> (), and then select [On] for [Group Images] in the [Playback Menu] () tab. (By default, [On] is selected.)



1. Press the <Playback> () button.


2. The last captured image will appear.

Operate the <directional buttons> left or right to choose an image that displays ().


3. The following screen appears.

Press the <FUNC./SET> () button.


4. The following screen appears.

Operate the <directional buttons> up or dawn to choose (), then Press the <FUNC./SET> () button again.


5. The following screen appears.

If you Operate the <directional buttons> left or right, only the images in the group will be displayed.

After pressing the <FUNC./SET> () button, Operate the <directional buttons> up or dawn to choose (), then press the <FUNC./SET> () button again to cancel group playback.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments