How to set High-Speed Continuous Shooting (High-speed Burst)
You can shoot continuously at a maximum speed of approximately 8.1 images/second while the <shutter button> is pressed fully and held.
note:
1. Press the <Power> button and Set the <Mode Dial> to (
).

2. Press the <FUNC./SET> (
) button.
3. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [Rec. Mode] (If no changes have been made so far, [Smart Shutter] (
) will be displayed).
Press the <FUNC./SET> (
) button.
4. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [High-speed Burst] (
).
Press the <FUNC./SET> (
) button.
5. The following screen appears on the LCD monitor.

If the [High-speed Burst] (
) icon is displayed on the upper-right part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
Viewing Each Image in a Group (Group playback)
When playing back images, images taken in [High-speed Burst](
) mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
important:
If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
reference:
1. Press the <Playback> (
) button.
2. The last captured image will appear.

Operate the <directional buttons> left or right to choose an image that displays (
).
3. The following screen appears.

Press the <FUNC./SET> (
) button.
4. The following screen appears.

Operate the <directional buttons> up or dawn to choose (
), then Press the <FUNC./SET> (
) button again.
5. The following screen appears.

If you Operate the <directional buttons> left or right, only the images in the group will be displayed.
After pressing the <FUNC./SET> (
) button, Operate the <directional buttons> up or dawn to choose (
), then press the <FUNC./SET> (
) button again to cancel group playback.