How to set High-Speed Continuous Shooting (High-speed Burst)
You can shoot continuously at a maximum speed of approximately 8.1 images/second while the <shutter button> is pressed fully and held.
note:
1. Press the <Power> button and Set the <Mode Dial> to ().
2. Press the <FUNC./SET> () button.
3. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select [Rec. Mode] (If no changes have been made so far, [Smart Shutter] () will be displayed).
Press the <FUNC./SET> () button.
4. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select [High-speed Burst] ().
Press the <FUNC./SET> () button.
5. The following screen appears on the LCD monitor.
If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
Viewing Each Image in a Group (Group playback)
When playing back images, images taken in [High-speed Burst]() mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
important:
If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
reference:
1. Press the <Playback> () button.
2. The last captured image will appear.
Operate the <directional buttons> left or right to choose an image that displays ().
3. The following screen appears.
Press the <FUNC./SET> () button.
4. The following screen appears.
Operate the <directional buttons> up or dawn to choose (), then Press the <FUNC./SET> () button again.
5. The following screen appears.
If you Operate the <directional buttons> left or right, only the images in the group will be displayed.
After pressing the <FUNC./SET> () button, Operate the <directional buttons> up or dawn to choose (), then press the <FUNC./SET> () button again to cancel group playback.