Connect the camera to the printer as indicated below.
Confirm that the printer is powered .
Load paper and confirm the correct media type is selected.
When you use photo paper, load it in the Rear Tray.
When you use A4, B5, A5, or Letter-sized plain paper, load it in the Cassette.
Make sure that the PictBridge compliant device is turned off.
Connect the PictBridge compliant device to the machine using a USB cable (A) recommended by the device's manufacturer.
The PictBridge compliant device turns on automatically. If your device does not turn on automatically, turn it on manually. When machine is correctly connected to the device, the message that the machine is connected will be displayed on the LCD of the device. Refer to the device's instruction manual.
Specify the print settings such as the paper type and layout. You can perform settings using the menu on the LCD of your PictBridge compliant device. Select the size and type of paper that you loaded in the machine. Settings on a PictBridge Compliant Device If your PictBridge compliant device does not have a setting menu, change the setting from the machine.
Note:
When printing from the PictBridge compliant device, set the print quality with the operation panel on the machine. You cannot set the print quality on the PictBridge compliant device.
When printing onto printable disc, attach the disc tray following the on-screen instructions of PictBridge compliant device.
Start printing from your PictBridge compliant device.
Important:
Never disconnect the USB cable during printing unless when explicitly allowed to by the PictBridge compliant device. When disconnecting the USB cable between the PictBridge compliant device and machine, follow the instructions given in the device's instruction manual.