Connect the telephone line cord to the appropriate port on the device.

The telephone line cord must be connected correctly for the device to function properly.

1. Connect one end of supplied telephone line cable (G) to the lower connector labeled [L] on the machine, and then connect the other end to the telephone jack on the wall (H). The [L] jack is the lower jack as indicated by the below illustration.
   
   
   
   
2. Remove the Cap (I) [1], then connect a telephone or an answering machine with the telephone line cord (2).
   
   
   

Othe Telephone Device Configurations

Connecting a computer -

1. Connect one end of the supplied phone cord to the modular jack on the wall and the other end to the [L] jack on the fax machine.
   
   
2. Connect another phone cord from the extension phone port on the fax machine to the computer's Line jack.
   
   
3. If you're connecting a separate telephone, connect it to the extension jack on the computer.
   
   
   
   The above illustration shows a PIXMA MX340.
   
   
   (A) Computer
   
   (B) Telephone or Answering Machine
   
   Note: See your computer's documentation for details on the locations of the phone jacks.
   
   

Connecting to an ISDN line -

For details on ISDN (Integrated Service Digital Network) connection and settings, refer to the manuals supplied with your terminal adapter or dial-up router.

Connecting to an xDSL line -

(A) Analog Subscriber Line

(B) xDSL modem (splitter may not be built-in to the modem)

(C) Computer

(D) Telephone or answering machine

Note: When connecting to the xDSL line, select the same line type as you are subscribing in Telephone line type. Before connecting a telephone or answering machine, remove the Telephone connector cap.

Important : When the splitter is not built-in to the modem, do not branch the telephone line before the splitter (wall side). And also, do not connect splitters in parallel. The machine may not be able to operate properly.