Copying an ID Card (MF3010)
Article ID: ART110887 | | | Date published: 05/11/2015 | | | Date last updated: 08/17/2015 |
Description
Copying an ID Card
Solution
Copying an ID Card
You can copy sides of cards onto one side.
note:
Before copying
- If the [
] indicator is on or other than [1] is displayed, the previous copy settings are remained.In this case, press [
] to reset the copy settings.
* If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
Operating results | Operating procedures | |||||
1 | ![]() |
Place the card on the platen glass, and then close it. Place the card to align the center of the card with the arrow mark.
* Place the card to fit in the left half of the platen glass. |
||||
2 | ![]() |
Press [ ![]() ![]() Specify the copy quantity first. You can set the copy quantity to "F" or "1" to "9." |
||||
3 | ![]() |
Press [ ![]() ![]() ![]() |
||||
4 | ![]() |
Press [ ![]() ![]() ![]() ![]() |
||||
5 | ![]() |
Press [ ![]() ![]() |
||||
6 | ![]() |
Press [ ![]() After scanning, "C" blinks. ![]() |
||||
7 | ![]() |
Turn and place the card. Place the card to align the center of the card with the arrow mark.
* Place the card to fit in the left half of the platen glass. |
||||
8 | ![]() |
Press [ ![]() After scanning, printing starts. |
note:
You can copy with combined the functions.
- Custom copy quantity
- Copy density
- Copy type setting
- Sharpness setting
Changing the copy ratio
- The output size is the same as the documents (100%).
Paper size requirements
- A size larger than A4 or Letter.
SIMS Doc Id
0